My daughter has a giant dollhouse.
A few years ago, my dad custom made it and it pretty much takes up most of her room. Alexis didn't start out with much in the way of furnishings, but over the years, we've remedied that with a few birthday/Christmas gifts and some craftiness. We found out that the store made doll beds don't tend to last long and we've glued one back together at least five times. Instead, we decided to make our own and we loved them so much that Alexis now has more beds than dolls!
First of all, we started out with half of a check box (the boxes that bank checks come in). Most of the beds we've made are just stand alone check boxes, but on this one, I had the perfect "headboard" - a chipboard piece that was shaped like a house. I glued the "headboard" to the box with Beacon Adhesives Fabri-tac.
After the glue had set, I picked out a May Arts ribbon for my "dust ruffle" and glued it around the bottom of the bed. The pleats really make it look like a dust ruffle!
Next, I took another piece of trim and adhered it on the top of the bed sides. I also added a rub-on to the headboard.
After I had the bed made, I went piddling around my craft drawers looking for something to make a pillow and comforter out of. I happened upon a square of deep aqua felt, an old pink kid's sock and some flowery and lacy trims.
For the pillow, I cut the sock in half (until it was as long as I needed to match the bed) and filled it with some extra fabric. I glued the end shut with Fabri-tac and then adhered the pink floral ribbon around it. That floral ribbon is AMAZING and it's from May Arts.
For the blanket, I cut pieces of lacy trim to match three sides and adhered them with my trusty Fabri-Tac.
Then I cut out one of the flowers from the flower ribbon and adhered it to the center.
And here's the finished bed & bedding!
So inexpensive, easy and a lot of fun. There are so many possibilities with these - we've used pom pom trim, elegant lace, embossed paper - you name it. Here's the bed inside one of the dollhouse rooms we've decorated.
Thanks for taking a peek!
Friday, July 27, 2012
Thursday, July 26, 2012
Weddings, continued
Apparently I need to get busy making more wedding cards - they were pretty depleted when I checked in at Annie Kay & Co. yesterday. Until I get some new ones made up, I have a bold wedding card I made last week for a wedding we attended. I lean more towards pretty and delicate, but the invites to this wedding were bold, graphic and modern - they were also done on the exact same grey metallic cardstock I used on the center of this card.
The silver strips are stickers - super easy borders. I adhered the bow (with Beacon's Fabri-Tac) at an angle to give it a different look.
The sentiment is an old rub-on I've had for years. I embellished it with some stick-on gems and this card was finished! Here's a peek at the inside.
Pretty simple, but it matches the style of the invites and that's what I was going for. Thanks for taking a peek!
The silver strips are stickers - super easy borders. I adhered the bow (with Beacon's Fabri-Tac) at an angle to give it a different look.
The sentiment is an old rub-on I've had for years. I embellished it with some stick-on gems and this card was finished! Here's a peek at the inside.
Pretty simple, but it matches the style of the invites and that's what I was going for. Thanks for taking a peek!
Wednesday, July 18, 2012
Plain cardstock, it is!
Since it's CHA season, I've been checking out all the recent paper releases and mentally making a wishlist. I do love some pretty patterned paper! The thing is, I also really enjoy using plain cardstock to make a lot of my projects. There are so many options. For example, on this card below, I embossed American Crafts Kraft cardstock with a Cuttlebug embossing folder. I recently taught my son to play "Heart and Soul" on the piano, so I wanted to go in that direction for this card. The "I" and "U" are American Crafts Thickers and the stamps are by Unity Stamp Co.
Here is another card where I used embossing and stamping. The embossing was done with a Sizzix folder and all the cardstock is American Crafts. Once again, the stamps are all Unity Stamp Co. as well. I just love that bicycle, by the way!
For this layout, I really wanted the colors of the photo to stand out, so I picked American Crafts Thickers that complemented it. I continued the look of the yucca plants with strips of cut cardstock in the left bottom corner. This was super easy to do - I just cut them at an angle in my paper trimmer. The journal spot was cut with Spellbinders dies and layered. The bottom layer was embossed with a Paper Studio wood grain folder.
So, give me a package of good cardstock and I'm a happy camper! That won't stop me from perusing all the new CHA releases any time soon. ;) Thanks for taking a peek!
Here is another card where I used embossing and stamping. The embossing was done with a Sizzix folder and all the cardstock is American Crafts. Once again, the stamps are all Unity Stamp Co. as well. I just love that bicycle, by the way!
For this layout, I really wanted the colors of the photo to stand out, so I picked American Crafts Thickers that complemented it. I continued the look of the yucca plants with strips of cut cardstock in the left bottom corner. This was super easy to do - I just cut them at an angle in my paper trimmer. The journal spot was cut with Spellbinders dies and layered. The bottom layer was embossed with a Paper Studio wood grain folder.
So, give me a package of good cardstock and I'm a happy camper! That won't stop me from perusing all the new CHA releases any time soon. ;) Thanks for taking a peek!
Wednesday, July 4, 2012
Be sure to check out the July issue of Scrap n' Art! There are all sorts of tutorials, sketches, reviews and more! I have a fun and easy step-by-step tutorial on how to make flower centers that can be used now or stored for later.
Thursday, June 28, 2012
4th of July
In the three years that I've been selling cards, I have never once sold a 4th of July card. I have never sent or received one either. I guess I just don't see the 4th of July as a "card holiday." It's too bad, really, because with the fireworks, stars and bold color scheme, 4th of July projects are so fun to make!
I made the red and blue banners with PTI doily stamps (the largest ones) and Memento ink in Bahama Blue and Lady Bug. the little stars were punched out with mini and regular punches (Target) and accented with tiny gems. The ribbon is May Arts and the punched edge is from a Martha Stewart Double Arches Deep Edge punch. Thanks for taking a peek and happy 4th of July to my US followers!
I made the red and blue banners with PTI doily stamps (the largest ones) and Memento ink in Bahama Blue and Lady Bug. the little stars were punched out with mini and regular punches (Target) and accented with tiny gems. The ribbon is May Arts and the punched edge is from a Martha Stewart Double Arches Deep Edge punch. Thanks for taking a peek and happy 4th of July to my US followers!
Wednesday, June 27, 2012
Limes
I love limes. In fact, I had a yummy Mike's Limeade last night and it really hit the spot. With temps in the 100s this week, I might need more! I'm also a margarita fan, so I was pretty excited when my best friend, Dayna, gave me this stamp from Unity. There is also a margarita glass with a wedge of lime, but I forgot to snap a pic of the inside of the card.
Thanks for taking a peek!
I have had this vintage image for quite sometime - it is from Crafty Secrets. Isn't she fun? I used a background paper by Prima along with Spellbinder die cuts (Eyelet Squares and Classic Lace Border). The flower is from a May Arts ribbon; I can't get enough of this stuff! It comes in white and cream too and takes color mist spray very well. I made the flower center and adhered it with Beacon Adhesives Fabri-tac. The cardstock and Glitter Cardstock (peridot) is from American Crafts.
Thanks for taking a peek!
Monday, June 25, 2012
June Weddings Part 2
At Hobby Lobby, they have such a cute selection of buttons in the scrapbooking section. However, the packages are small and rather expensive without a coupon. Instead of getting packages of the small themed buttons, I like to get the extra large grab bags that have a TON of buttons in them - you don't know for sure what you'll get and that's part of the fun. I've never been disappointed. In the last bag I got, I found a cute little diamond solitaire button and I've been saving it for a cute wedding card. I'm glad I finally got around to using it!
The background paper is a damask embossed cardstock - not sure on the brand. I die cut the white doily with a PTI Parisian Doily die. I love the detail you get with this die. The lacy ribbon is by May Arts and I stamped the sentiment with Versamark ink and embossed it with American Crafts Zing embossing powder.
Thanks for taking a peek!
The background paper is a damask embossed cardstock - not sure on the brand. I die cut the white doily with a PTI Parisian Doily die. I love the detail you get with this die. The lacy ribbon is by May Arts and I stamped the sentiment with Versamark ink and embossed it with American Crafts Zing embossing powder.
Thanks for taking a peek!
Subscribe to:
Posts (Atom)